Lenovo S10 camera ใช้ไม่ได้หลังจาก up Firmware
มีใครลองอับแล้ว เป็นเหมือนผมบ้าง
ตอนนีลง XP Pro ก็ยังใช้ไม่ได้
************---*****************---**************
เพิ่มเติมทาง Lenovo ออก Patch มาแก้แล้วครับ
http://consumersupport.lenovo.com/en/ ... s/drivers_show_1260.html#SYMPTOM:
After installing the Bison Camera Firmware Upgrade, the S10 camera will stop working and display only grey or black background.
AFFECTED CONFIGURATIONS:
Ideapad S10 can be equipped with two different camera sensors. The firmware upgrade available on the website, (version 1404) would damage the existing firmware of one of the cameras and cause the problem described above.
Important Note: This hotfix must ONLY be installed on the machines affected by the symptoms described above. If the camera is working properly, do not install this hotfix. Otherwise, the camera firmware will be destroyed permanently.
A new Firmware upgrade, version 1405, has been released and is available on the website in order to prevent the issue from happening.
SOLUTION:
1.Download the hotfix ?Bison camera FW refresh tool?
2.Double click on the executable file.
3.You will see the dialogue box below
4.Press ?FW Upgrade?
5.You will see a message that describes the success / failure of the upgrade
6.To Complete the Firmware (FW) upgrade, please power off the camera device or turn off the notebook (NB).
TRADEMARKS:
Lenovo, Lenovo 3000, IdeaCentre and IdeaPad are trademarks of the Lenovo Corporation in the United States, other countries, or both.
Document ID: IN20090414-001
Last modified: 2009-04-14